INFORMATION CENTER
Fire hose maintenance measures
Abstract:Near the front, the hose is connected, the fire hose must be padded with a layer of soft protection when the hose is set on the hose interface, and then tied with galvanized iron wire or throat hoop.
Use and maintenance of fire hose:
The use of the fire hose is connected with the protection of the first and the hose. When the fire hose is set on the hose interface, it must be padded with a layer of soft protection, and then tied with galvanized iron wire or throat hoop.
Two, the use of water. When using the fire hose, the high-pressure hose should be connected to the nearest place from the pump, the water should be filled with water to prevent torsion or sudden bending, and the hose interface should be prevented from collision damage.
Third, water belt laying. When laying the water belt, to avoid sharp objects and various oils, when laying the water vertically to the height, to use the water hook, when laying the water through the traffic arteries, the water should be placed on the water protection bridge, through the railway, the water should be passed under the track, to avoid the water being crushed by the wheel and intermittent water supply.
4. Prevent icing. In the severe winter season, when the water supply needs to be suspended on the fire site, in order to prevent the water from freezing, the pump needs to run slowly and maintain a small water yield.
Fifth, the water belt cleaning, the use of water, to clean, the delivery of foam water, must be carefully washed, protect the rubber layer. In order to remove the grease on the hose, you can wash it with warm water or soap, for the frozen hose, first melt it, and then wash and dry it, and the hose that is not dried should not be stored in the roll. Raise:
The use of the fire hose is connected with the protection of the first and the hose. When the fire hose is set on the hose interface, it must be padded with a layer of soft protection, and then tied with galvanized iron wire or throat hoop.
Two, the use of water. When using the fire hose, the high-pressure hose should be connected to the nearest place from the pump, the water should be filled with water to prevent torsion or sudden bending, and the hose interface should be prevented from collision damage.
Third, water belt laying. When laying the water belt, to avoid sharp objects and various oils, when laying the water vertically to the height, to use the water hook, when laying the water through the traffic arteries, the water should be placed on the water protection bridge, through the railway, the water should be passed under the track, to avoid the water being crushed by the wheel and intermittent water supply.
4. Prevent icing. In the severe winter season, when the water supply needs to be suspended on the fire site, in order to prevent the water from freezing, the pump needs to run slowly and maintain a small water yield.
Fifth, the water belt cleaning, the use of water, to clean, the delivery of foam water, must be carefully washed, protect the rubber layer. In order to remove the grease on the hose, you can wash it with warm water or soap, for the frozen hose, first melt it, and then wash and dry it, and the hose that is not dried should not be stored in the roll. Raise:
The company has advanced production and testing equipment, strong technical force.
Our company majors in producing "Geshui" brand fire hose, lay-flat hose and related accessories (such as coupling and nozzle). Our main have PU lined fire hose,PVC lined fire hose,Rubber lined fire hose,Durable fire hos . As for the coupling,we have storz coupling,John Morris coupling,US type,Machino coupling etc.